Upcoming Events

Sep 24 - Sep 25

Data Center Austin Conference
Security Electronics Purchase 1
View Details »

Nov 06

EDGE GLOBAL CONGRESS 2019
Security Electronics Purchase 2
View Details »

Featured Product

Bussed Gutters are now available for purchase. The ampacities are from 400 to 4000. Fabricated from 12 gauge cold-rolled steel with mounting ears for easy installation. Standard three-phase/four-wire configuration and custom configurations available. Lengths of up to 30 feet are ULlisted and please consult factory for larger lengths. Available in a horizontal or vertical design.

Security Electronics Purchase

Touchbolt Dry Contact Control Module

Provides on-off control of one circuit by means of a touch-sensitive input. The touch controller is activated by the Touchbolt Assembly.

  • Rated for loads of 0.5 amps at 125VAC or 1 amp at 30VAC/30VDC.
  • Input Current 3mA Off, 12mA On (24VDC or 24VAC).
  • Number of operations under rated electrical load is 200,000 minimum.
  • Faceplate and Touchbolt™ Assembly not included with standard TBM5-TERM unit.
  • Variations

    TBM5-TERM

    Touchbolt, Fixture Mount

    Interacts with TBM5-TERM Dry Contact Control Module and ELCLM-3 Touch Controller.

  • The Panel Mount TBA is designed to mount in a panel of varying thickness, up to 1/2” thick.
  • The Panel Mount TBA consists of Stainless steel carriage bolt and Two (2) nuts.
  • Sizes are 1/4”-20 and 1/2”-13. Lengths range from 1.00” to 10” long, custom sizes available.
  • Stainless steel bolt and hardware standard.
  • Extremely rugged and highly resistance to vandalism…
  • Variations

    1/4-20 x 1.75" for 11 to 14 gauge plates

    Touchbolt, Panel Mount

    Interacts with TBM5-TERM Dry Contact Control Module and ELCLM-3 Touch Controller.

  • The Panel Mount TBA is designed to mount in a panel of varying thickness, up to 1/2” thick.
  • The Panel Mount TBA consists of Stainless steel carriage bolt and Two (2) nuts.
  • Sizes are 1/4”-20 and 1/2”-13. Lengths range from 1.00” to 10” long, custom sizes available.
  • Stainless steel bolt and hardware standard.
  • Extremely rugged and highly resistance to vandalism…
  • Variations

    1/2-20 x 1.75" for up to a 1/4" panel

    1/2-20 x 2.5" for up to a 1/2" panel

    Touchbolt, Through-wall Mount

    Interacts with TBM5-TERM Dry Contact Control Module and ELCLM-3 Touch Controller.

  • The Panel Mount TBA is designed to mount in a panel of varying thickness, up to 1/2” thick.
  • The Panel Mount TBA consists of Stainless steel carriage bolt and Two (2) nuts.
  • Sizes are 1/4”-20 and 1/2”-13. Lengths range from 1.00” to 10” long, custom sizes available.
  • Stainless steel bolt and hardware standard. Extremely rugged and highly resistance to vandalism…
  • Variations

    1/2-13 X 8" for 6" thick walls

    1/2-13 X 6" for 4" thick walls

    1/2-13 X 10" for 8" thick walls

    Touchbolt Switch Module, Maintained (Sink)

    Touch activated switch. The main output drive activates on the initial touch and remains active as long as the touch is held. The output then deactivates when the touch is released.

  • Rated for loads of 0.5 amps at 125VAC or 1 amp at 30VAC/30VDC.
  • Faceplate and Touchbolt Assembly not included with standard TBM5-TERM unit.
  • Input Current 3mA Off, 12mA On (24VDC or 24VAC).
  • Number of operations under rated electrical load is 200,000 minimum.
  • Variations

    TBM3000- Rev B, Momentary (Sink) Touchbolt Switch Module

    TBM4000- Rev B, Maintained (sink)

    Touchbolt Switch Module, Momentary (Source)

    Touch activated switch. The main output drive activates on the initial touch and remains active as long as the touch is held. The output then deactivates when the touch is released.

  • Rated for loads of 0.5 amps at 125VAC or 1 amp at 30VAC/30VDC.
  • Faceplate and Touchbolt Assembly not included with standard TBM5-TERM unit.
  • Input Current 3mA Off, 12mA On (24VDC or 24VAC).
  • Number of operations under rated electrical load is 200,000 minimum.
  • Variations

    TBM3000- Rev B, Momentary (Source)

    ELCML-3 Touch Controller

    The ELCML-3 touch controller is an electrical module designed to provide on/off control of two independent lighting circuits by means of a touch-sensitive input. In addition to the touch-control input, two low-voltage override control inputs are provided which can be used to give forced-on and forced-off control of the lighting circuits.

  • Stranded copper wire– #1is recommended for active touch-sense.
  • Maximum total distances between the touch controller and the Touchbolt Assembly is 20 feet.
  • Touch-sense must be run in non-metallic conduit.
  • Through-wall penetrations must be run in PvC conduit. Touch lead cannot be run with power leads or next to large moving metal objects such as HvAC duct.
  • The ELCML-3 are UL recognized components complying with UL safety standard UL244A for solid-state controls for appliances. Number of operations under rated electrical load is 200,000 minimum.
  • Variations

    9.8 ounces / Part # 503120*